Features

The T5GM Microwave LED Glass Tube fits into your exiting fluorescent T5 light fixtures
The T5GM Microwave LED Glass Tube addresses this issue by distributing the sensor technology to each and every light bulb. This way lights are only on in the areas which are actually occupied.
Recommended Installation Height of 6-8m With sensor Radius of 6M
Triggered Instant Start, Sleep Time Customizable (Standard 45 Seconds, Maximum 3 Minutes)
Sleeping Brightness Customizable (Standard 3W, 1-10W Feasible)
High Frequency Sensor Module of High Sensitivity to Human Body
Sleeping Setting allows Energy Saving Up to 95%
Single End, Double End Input.
Furthermore, when not on at full brightness, they do not turn off completely.
They remain in standby (sensing) mode and still emit 20% of their total light output
Massive energy savings await
Compared to conventional fluorescent tubes, the T5 LED Glass Tube with microwave motion sensor will save nearly 93% of operational energy usage
LED Tube with Microwave Motion Sensor fitting G5 Connector
Sensor range is up to approximate 12m
Voltage : 85-277 VAC 50-60Hz, 85-265VAC 50/60Hz
Life Span : > 50,000 hours
Color Temperature : 3500K, 4500K, 6500K
Beam Angle : 330°, Light output 100-160lm/W
18W T5 LED Aluminum Capping Glass Tube with Microwave Function
Full brightness when movement detected, dropping to 20% (3.6W) brightness in standby mode (no movement).—- (First Manufacturer in T5 Microwave LED Glass Tube)
In-built microwave motion sensor and Smart Driver
Easy to install and replace in existing fittings

Leave a reply

Your email address will not be published. Required fields are marked *

Close
Go top